How to: Rinseless Wash

Step 1: Mix the Rinseless Solution with Water
Fill a bucket with water and add the appropriate amount of rinseless solution. (Add 1 ounce of solution for every two gallons of water)

Step 2: Pretreat
Using the spray bottle filled with the diluted solution, apply the rinseless solution on the vehicle to pretreat. Work section by section from top to bottom. Allow solution to soak for 2-5 minutes.

(If vehicle is very dirty, you could now do a pre-rinse with a hose or pressure washer and reapply a bit of rinseless solution before moving to step 3)

Step 3: Wash with Sponge
Dip the sponge into the bucket and lightly squeeze it out. Then, apply the solution to the vehicle gently in straight lines. Work from the top of the vehicle to the bottom.

Wash one panel at a time, then flip the sponge and use the other side to do a second panel. Then return to the bucket and repeat Step 3 until the whole vehicle has been washed.

Step 4: Wipe Dry
Using your clean microfiber towel, dry the vehicle using light pressure and in straight motions. You may use the spray bottle to help dry off the vehicle if it has begun to air dry.

Pro Tip: Dry off each panel or two as you finish washing it. This way once you go around the vehicle one time you are done!